Description
Brass bearing - for shaft Ø 2.38 mm (3/32") - for anchoring Ø 4.6 to 5 mm - 0.39 gr./unit - bag with 2 units.
The world's first self-lubricating bearing designed for slot cars. Its design and subsequent manufacture have been a major challenge, as its apparent simplicity masks the enormous difficulty of its production.
Thanks to its small conical reservoir and tiny 0.20 mm diameter hole, the lubricant flows slowly to the shaft, constantly lubricating it.
The idea of the inner groove has been conceived to achieve two objectives; to reduce the contact surface with the shaft by 50% and for the inside of the groove to act as a lubricant reservoir.
It is ideal for all short races, typical club races, and medium-length races because the axle remains lubricated for much longer than a standard cushion.
VERY IMPORTANT: Before the first use and after each cleaning, it is necessary to lubricate as usual, as is normally done in a traditional bearing.
Compatible with all traditional or 3D plastic anchors between 4.6 and 5 mm in diameter.
REMEMBER: To ensure proper functioning, reliability and durability of a brass bearing, it is VERY IMPORTANT to lubricate regularly and generously.